OPTispray
High-pressure spray rinse on UniLinc Touch packages. UniMac publishes 39% less rinse water and 12% less cycle time versus a conventional fill-and-dump rinse. Not on M30.
Commercial use only. Prices are machine-only — freight and installation are quoted for the site.
UniLinc Touch · internal suspension · up to 400 G
from $6,838
No models match those filters.
Printed table from UniMac brochure AU25-0074. Marketing copy says “up to 400 G” — these capacities extract at 360 G (100 / 135) or 350 G (180 / 230 / 275). With-tilt dimensions apply only when the SKU includes forward tilt.
| UY100 | UY135 | UY180 | UY230 | UY275 | |
|---|---|---|---|---|---|
| Control | UniLinc Touch | UniLinc Touch | UniLinc Touch | UniLinc Touch | UniLinc Touch |
| Capacity | 100 lb | 135 lb | 180 lb | 230 lb | 275 lb |
| Tilt option | None | None | Option | Option | Option |
| Width | 51 4/5 in | 51 4/5 in | 58 7/8 in | 70 1/2 in | 73 in |
| Depth | 59 1/10 in | 59 1/10 in | 76 3/8 in | 78 15/16 in | 82 1/8 in |
| Height | 75 4/5 in | 75 4/5 in | 78 1/8 in | 81 1/8 in | 82 1/8 in |
| Width with tilt | — | — | 61 5/8 in | 72 7/8 in | 74 9/16 in |
| Depth with tilt | — | — | 93 11/16 in | 99 3/4 in | 100 1/2 in |
| Height with tilt | — | — | 97 1/2 in | 101 3/8 in | 103 1/2 in |
| Cylinder volume | 15.96 cu ft | 21.22 cu ft | 28.5 cu ft | 34.3 cu ft | 40.8 cu ft |
| Wash RPM | 38 | 36 | 36 | 33 | 32 |
| Extract RPM | 839 | 788 | 750 | 720 | 695 |
| Extract G-Force | 360 | 360 | 350 | 350 | 350 |
| Motor HP | 10.06 | 10.06 | 14.75 | 20.12 | 24.81 |
UY 100-275 brochure (AU25-0074). UY100 / UY135 also have a per-model CSI PDF on the SKU page.
This is the UniMac softmount line — UYT, 20 to 275 lb — the machine we specify when the laundry is on a second floor, over occupied space, or on a structure that cannot take extract vibration. Internal suspension takes the extract. UniMac UYT runs up to 400 G on the small capacities.
You pay more for the washer and usually less to install, because we are not asking the building for a hardmount floor. If you have a reinforced ground-floor slab and you want the lower machine price, open pocket or cabinet hardmount.
Call (732) 681-0500 with the floor, the drain, and the voltage. Freight and installation are quoted for the site.
Q3 UniMac rebate does not apply to this line (softmounts excluded). Terms.
High-pressure spray rinse on UniLinc Touch packages. UniMac publishes 39% less rinse water and 12% less cycle time versus a conventional fill-and-dump rinse. Not on M30.
Capacitive control with programmable cycles, diagnostics, and delayed start. M30 is the simpler program control when you do not need the touchscreen.
UW pocket hardmounts run 100G, 200G, or High-G. UY softmounts extract harder — up to 400 G on the small capacities. Higher G leaves less water for the dryer.
When the laundry is not on a slab that can take extract — second floor, over occupied space, or a light structure. Hardmount is cheaper on a proper floor.
Up to 400 G on the small capacities. That is harder extract than a typical hardmount of the same size.
No. The Q3 UniMac rebate excludes softmounts. The bar on this page is there so that is not a surprise.
No. Equipment only. Call (732) 681-0500.
No. Commercial use only.
Call (732) 681-0500 with capacity and voltage. Freight and installation are quoted for the site.
Download official UniMac brochures and spec sheets for this product line. For specific delivered-and-installed pricing in NJ, eastern PA, NYC, or Delaware, call HM Commercial Laundry at (732) 681-0500.