Continental Girbau Commercial Washer & Dryer Repair — New Jersey, NYC & Eastern PA

Continental Girbau Commercial Washer & Dryer Repair

Continental Girbau washer-extractors and dryers run in on-premise laundries and laundromats throughout New Jersey and the tri-state. We repair the full washer and dryer line.

HM Commercial Laundry is an independent service company, not affiliated with Continental Girbau. We repair Continental Girbau washers and dryers with OEM parts sourced through regional distribution.

We service Continental Girbau washers and dryers. We do not service flatwork ironer / finishing equipment.

Continental Girbau Equipment We Repair

Common Continental Girbau Problems We Fix

• Washer won't start or won't fill
• Won't spin or drain; water left in the drum
• Out-of-balance faults and excessive vibration on high-G extract
• Door-lock and lid-lock errors
• Water fill and inlet-valve issues
• No heat or weak heat on dryers; long dry times or restricted airflow
• Inteli control error codes
• Worn bearings, belts and seals

Seeing an error code on the display? Don't keep running the machine through a fault — codes vary by model and control generation, so write it down exactly as displayed, note the model number, and call (732) 681-0500. We'll tell you what it means on your machine and whether it needs a visit.

Before You Call: What to Have Ready

Two minutes at the machine saves a return trip. When you call (732) 681-0500, have this handy:

• Model and serial number — on the data plate, usually just inside the door, on the rear panel, or behind the lower front panel.
• The exact error code as shown on the display, and what the machine was doing when it appeared (filling, washing, extracting, heating, cooling down).
• Machine type — hardmount or softmount washer, gas or electric dryer, on-premise or coin/card operated.
• Any warranty or service contract the machine is under, so we route the repair correctly.

Continental Girbau Parts

We source OEM Continental Girbau parts for washer and dryer repairs.

Service Rates

• New Jersey: $295 for the first hour, then $150 per additional hour
• Outside New Jersey (NYC, Rockland County, eastern PA, northern DE): $395 for the first hour, then $150 per additional hour
• Parts: billed separately at standard pricing, quoted before the repair begins

The first hour covers travel and on-site diagnosis. If a repair will run beyond that, you get the parts cost, labor estimate and expected downtime up front — no surprises on the invoice.

Why Facilities Call HM Commercial Laundry

• 37+ years on commercial laundry equipment and 300+ facilities served across the Northeast
• Independent, multi-brand technicians — the same techs who install and warranty UniMac also repair every other major brand every week
• Same-day service in most of our territory and emergency dispatch when a machine is down
• OEM parts on the truck for the failures we see most, so the majority of repairs finish in one visit
• Estimate before the work — published rates, no surprise invoices

Related: all-brand commercial laundry repair · commercial washer repair · commercial dryer repair · Continental Girbau troubleshooting guide · preventive maintenance programs

Service Across New Jersey, NYC & Eastern Pennsylvania

We dispatch from Jackson, NJ and cover all 21 New Jersey counties, the five boroughs of New York City, Rockland County, NY, the Philadelphia area and eastern Pennsylvania, and northern Delaware. Same-day service in most of our territory when you call before noon, and emergency dispatch when a down machine is stopping the operation. Find your county on our locations page, or call (732) 681-0500 to confirm availability today.

Frequently Asked Questions

Do you have to be a Continental Girbau authorized servicer to repair my machine?

No. HM Commercial Laundry is an independent commercial laundry service company. Our technicians repair Continental Girbau commercial washers and dryers every week alongside every other major brand, using OEM Continental Girbau parts. We are not affiliated with Continental Girbau.

How fast can you get to a down Continental Girbau machine?

Same-day service in most of our New Jersey territory when you call before noon, and emergency dispatch when a down machine is stopping the operation. We also cover the five NYC boroughs, Rockland County NY, eastern Pennsylvania and northern Delaware from our Jackson, NJ base. Call (732) 681-0500 with the model number and the fault.

Do you repair vended (coin or card) Continental Girbau machines as well as on-premise?

Yes. We repair Continental Girbau washers and dryers in laundromats and multi-housing laundry rooms (coin, card and app-pay) as well as on-premise washer-extractors and dryers in hotels, healthcare and institutional laundries. We do not service ironers, presses or tunnel washers.

What does a Continental Girbau service call cost?

$295 for the first hour in New Jersey ($395 outside New Jersey), then $150 per additional hour, plus parts. The first hour covers travel and diagnosis, and you get an estimate before any repair beyond the diagnosis begins.